Brite-Lite Modular Lightbox Display (8x8ft)

Yes! All the LED lights are NFL certified with 3 years warranty. Also we provide lifetime warranty on the frame, so you can have the peace of mind of your purchasing.

Modular is a term used to describe the construction of an object using smaller interchangeable parts. Modular Alpine Trade Show Displays can be configured in a variety of ways. Smaller pieces make up larger frames that can be constructed to a customer's liking.

Pop up displays and tension fabric displays for the trade show booths are very popular. Also a lot of our customers place custom feather banners or retractable banner stands near the trade show podium to make announcements and to attract more attention.

The trade show table cover is another affordable fabric table cover solution for trade show or events, especially if you have a 6ft or 8ft table on the display site. Custom trade show counters and trade show podiums on the other hand, come with a high-quality frame with custom prints, and can be used as a standing alone centerpiece of trade show booth or meeting venue like a piece of furniture. Also there is a wide variety of shapes and styles for trade show counters.

With this newly designed SEG, the graphics are simple to install, using no professional installation. Start by pressing the corners of your graphics silicone beads into the frames channeling. We recommended starting by the corners so that when the last edge is installed It will have a seamless appearance.

After use, store your graphics by folding them in a neat manner in a bag that can hold them. If you ever get your graphics dirty, you can use a non-abrasive damp cloth to spot clean any areas as needed. However, if the mess is too much for hand cleaning, you can always put your graphics in the washing machine on the gentle cycle with cold water only. We recommend allowing the graphics to air dry after washing them. With the dye sublimated graphics, your SEG is going to last you many trade shows to come!

The benefits to using modular lightbox displays are the freedom of changing your booths design at will. You can have several different looks in just minutes.

The difference in the two LED displays we offer is very simple. It all lies in the light mechanisms. The modular displays have built in LED light right in the frame. Our regular backlit displays have a frame and LED curtain that is installed as well.

Takedown is easy. Separate the top from the trade show counter. Remove the center shelf (if any)from the inside. Remove the aluminum frame one by one from the inside and around the fabric cover/warp. Roll the wrap up. Place everything back into the carrying bag and store safely.

SEG graphics are the newest innovative way to showcase your tradeshow booth to your awaiting potential clients. SEG is an abbreviation for silicon edge graphics, which means your printed designs will be made all the way to the edge for a seamless look. This is done by sewing the silicon edge around the edges of your printed material allowing for effortless installation. It also will give your graphics a taut sturdy look on premium thick fabric. stop by LushBanners.com and get your order started today!

For a smart, versatile and sophisticated off-the-shelf exhibit with a custom appearance, check out our modular displays. The wide ranging line of modular exhibits use standardized aluminum or steel components as building blocks, and can often be reconfigured to fit multiple size spaces, or customized for any need.

Modular lightbox displays are constructed with a basic frame and SEG graphics. The pieces connect by basic male and female tabs to create the frame. The SEG graphics lay right into the frame for a seamless look.

Yes a few of our single lightbox displays can adjust in height from 8ft to a shorter 6.5ft option. Separate graphics have to be purchased to accommodate the size desired. These modular pieces can then be combined to create larger more detailed structures.

SEG’s first appeared for trade shows in Europe in 2008, and ever since then they have become a key preference for prospective companies that always have the best booths. This is all from its contemporary modern look, and simple installation. Compared to other forms of booth displays, the SEG allows for a versatile change of graphics for any event and occasion at a low price.

The process we use to create the graphics is called dye sublimated printing which fuses your designs ink onto the fabric for a lasting product. It includes vaporizing the ink so that they will saturate the material on an accurate scale. This is what gives all of our products a vibrant high resolution look and finish.

TSEG’s can be used for a variety of applications including purposes for trade shows, retail stores, museums, restaurants, churches, universities, airports and other venues.