8ft Tabletop Fabric Display Stand (Curve)

There is almost an unlimited amount of uses for fabric tension displays. The large display areas and portable designs are great for permanent fixtures in your business space as they also travel well for traveling shows. They make excellent backdrops for photographs or videos at trade shows and expos, weddings, and corporate events.

Our tension fabric tradeshow displays are 9oz, which doesn't compromise the quality and durability while still offering maximum stretchability. Our years in business have taught us that more thickness is the best and most affordable option.

No, all of our tension fabric displays are built for certain size fabric displays and are not adjustable.

Yes! We do offer double sided options. Make sure you select the option for double sided when ordering and be sure to include both sides of your design. Reach out to us today if you have specific design questions so we make sure that every material you order is perfect.

Our stretchable fabric materials are not transparent. If your design is very light or if there are a lot of bright lights behind the display, you might be able to see some light pass through. However, our 9 oz tension fabric is fairly thick and therefore doesn't have a lot of shining through it.

You should be able to easily attach your custom fabric display to the frame by pulling it snugly over the top. It should be snug and secure as there is a zipper at the bottom to ensure that your fabric doesn't slide off the frame. Commonly called a pillow case display. Although one person can do the installation, we do recommend two persons for a quicker installation.

The poles are made from a lightweight aluminum that makes for easy transport and setup without compromising the sturdiness of the frame.

The zipper is not essential for the fabric display to attach to the frame, though we do recommend it to make sure that the display remains smooth and tight and in the right place. We recommend replacing the display eventually, but the frame should get the job done if something should happen to the zipper.

Lush Banners uses a dye sublimation process that prints your design directly onto the tension fabric. It is the best way to do it to adhere the ink to the fabric material so that your designs stay vibrant for a long period of time.

When you order display graphics from Lush Banners, you get a matte finish that stays vibrant and clear when stretched across the frame.

No, our tension displays do not rip or tear easily. As long as you are using it properly, and transporting and storing it carefully, you should have no worry about damage. Though there is always a chance that sharp objects can tear it, our materials are high quality and durable.

Though all of our promotional products are durable and high quality, we recommend leaving your custom tension fabric display indoors. Our frames are made from durable aluminium, they are not weighted or anchored down to the ground, so strong windy weather might blow them away. Under the right conditions, your backdrop display can be used outdoors, but we recommend you use caution.

We use a dye sublimation process which means the ink goes into the fabric and should make fading and scratching less likely. If you properly care for and store your design, it will last for years and be bright and vibrant for all of your events!

The main differences between the Premium and Standard are that the premium has a heavier frame and feet and the carrying case has wheels. The premium also has a more in-depth warranty.

We offer a wide array of tension fabric display sizes and shapes. Prices range from $399 for a 6ft table top display to $8,099 and up for a 20ftx60ft grand arch display kit.

Generally, Tension fabric displays are made using aluminum tubing hardware that fits seamlessly together, while the fabric graphics are printed on premium polyester fabric, and are easy to set up. Lush Banners offers many unique shapes and designs that the polyester fabric fits over and takes the shape of.

Yes! Our fabric tension displays are available in straight, curved and circle models in sizes from 6ft to 15-20ft displays.

The terms 'retractable banners' and 'pop up banners' are generally used interchangeably. But 'pop up displays ' are a totally different large format displays used strictly indoors.

Yes! We do offer double-sided printing options for all of our pop up displays including our curved option.

Depending on the model of your retractable banners. Graphic Interchangeable Flex Retractable Banner Stands have a one-click magnetic change design, and you can adjust the tension and switch out graphics easily. Other models are spring-loaded in the base, and attempting to open by yourself without experiences could cause damage to the banner stand and a possible injury as well (be careful).

Although one person set up is possible, we do recommend 2 persons, because of the extra wide frame and increased tension.

We use high quality 9oz polyester fabric, which is durable and wrinkle resistant, with minimum see-through.

Inside the aluminum supporting pole is a bungee cord to help guide the pole set up and to keep the pole parts together so you won't ever lose half of your pole.

They all are made by aluminum frames and tension fabrics. The major differences are:

• The look: Pop up displays look more blocky with the cross bar frame design. Frame are visible for sides or back. Tension Fabric Display on the other hand, all frames other than the weighted feet are covered seamlessly by the graphics, very sleek and modern looking.
• The Frame: Pop up displays have cross bar frames. Frames are visible from the sides or the back. Tension Fabric Displays are made by hollow aluminum tubes which are not visible after assembly.
• The Assembly: Pop Up Displays are designed to be quickly setup and takedown, the graphics are quickly attached to the frame by Velcro strips or silicone edge graphic channels. Tension Fabric Displays have pillowcase graphics that will be wrapped around and held in place by the tension of the graphic and enclosed zipper.

Depends on the model of your retractable banners. Height adjustable retractables like Flex Retractable Banner Stands come with telescopic poles that can be height adjustable, just turn and lock.

Our Standard pop up displays refer to the standard connectors of the frame, standard connectors can be connected or disconnected by the snap fit design. Standard pop up displays come with a standard 12 months warranty and a free canvas carrying bag. Premium Magnetic Pop Up Displays refer to the magnetic connectors of the premium pop up display frame. Premium Magnetic Pop Up Displays have 4-6 reinforced snap fit connectors, the other connectors have magnetic tips which connect and disconnect automatically. Making pop up display assembly even quicker and easier. Premium Magnetic Pop Up Displays come with a limited lifetime warranty on the frame and a free hard-padded roller case.

Currently we do not have Table top Retractable Banners in stock.But we do offer flexible changeable series, which is height adjustable 33.5 x 94. It can be displayed on a tabletop.

"SEG" means "Silicone Edge Graphics", Silicone Edge Graphics are ultra high definition dye-sublimated graphics with silicone edges which can be pushed in to edge the channeling of the aluminum frame to create the seamless, super flat display effect. Silicone Edge Graphics are Easy to change and look really amazingly sharp! The SEG Module Pop Up Displays also could be combined or added accessories like a TV rack and display shelves, you can even add LED curtains to light up. No doubt why the SEG Module Pop Up Displays are the rising star of pop up display families. SEG Graphics are easy to put in, and we suggest starting at the corners and using your fingers to gently press the silicone beads into the channeling of the aluminum frame. By inserting the corners first, it helps ensure that there will be no excess fabric when you insert the last portion.

You need to carefully and slowly pull up your banner out of the stand and put it back into the stand, pay attention to keep the graphic centered or your banner might go in the stand crooked, causing damage to the edges of your graphic permanently.

By simply adding SEG Module Pop Up LED lights Kit, your SEG Module Pop Up Displays will transform to a Backlit Module Pop Up Displays! Depending on the display need, you can use your SEG Module Pop Up Displays with or without lights. Adding lights however does increase the total weight of your display quite significantly when you travel.

Retractable banners, also called roll up or pull up banner stands, have a spring roller mechanism that retracts the banner into the base of the stand when it's not in use, to protect the printed banner. These are the most popular type of banner stands for trade shows and events indoor, as they are the easiest to set up and take down.

There are many ways you can get pop up banner display for trade show. The first step is to choose the size, shape and printing options. The second step to find a vendor can produce the pop up trade show displays for you. You can ask a local trade show exhibits vendor, but the price will be on the higher end. Online specialty merchandisers like Lush Banners normally will provide a better range of product options and much better pricing in general.

Warning: The base of a retractable banner stand is spring-loaded with high tension, please do use the “key” to hold the banner into place. Attempting to open by yourself without experience could cause damages to the banner stand and possibly injury.

• Step 1. Pull the banner all the way up until the end of the thread lead.
• Step 2. Insert the security key into the hole on the side to hold the banner securely in the place.
• Step 3. Carefully remove the old banner, clear all the tapes and glues, open the top clap, set aside the top clap for the new banner.
• Step 4: Use double-sided tape to secure the new banner onto the banner lead first, then use clear tape to wrap around the edges.
• Step 5. Inset the top part of the new banner into the top clap bar, press firmly
• Step 6. Remove the security key and retract the new banner into the base.

To fly with a retractable banner, you will need to buy a hard banner stand carrying case and choose a retractable banner no wider than 36 inches.

No, these pull-up banners are designed to be used indoors only. They are not heavy enough to stay in one place if blown by the wind, and the base and retractable mechanism inside can be damaged or ruined if any water gets inside.

Yes, we have two models of pull up banners with double-sided capabilities. Our Standard, and Interchangeable Flex retractables are available in double-sided, or with two graphics that can be displays simultaneously.