Fabric Banner Stands
(Steel Base)

Yes! All the LED lights are NFL certified with 3 years warranty. Also we provide lifetime warranty on the frame, so you can have the peace of mind of your purchasing.

Yes! They can be used with or without LED lighting. Without the lights, they are also perfect for everyday indoor display.

SEG graphics are the newest innovative way to showcase your tradeshow booth to your awaiting potential clients. SEG is an abbreviation for silicon edge graphics, which means your printed designs will be made all the way to the edge for a seamless look. This is done by sewing the silicon edge around the edges of your printed material allowing for effortless installation. It also will give your graphics a taut sturdy look on premium thick fabric. stop by LushBanners.com and get your order started today!

Depending on the model of your retractable banners. Graphic Interchangeable Flex Retractable Banner Stands have a one-click magnetic change design, and you can adjust the tension and switch out graphics easily. Other models are spring-loaded in the base, and attempting to open by yourself without experiences could cause damage to the banner stand and a possible injury as well (be careful).

Modular lightbox displays are constructed with a basic frame and SEG graphics. The pieces connect by basic male and female tabs to create the frame. The SEG graphics lay right into the frame for a seamless look.

SEG graphics are the newest innovative way to showcase your tradeshow booth to your awaiting potential clients. SEG is an abbreviation for silicon edge graphics, which means your printed designs will be made all the way to the edge for a seamless look. This is done by sewing the silicon edge around the edges of your printed material allowing for an effortless installation. It also will give your graphics a taut sturdy look on a premium thick fabric. Stop by LushBanners.com and get your order started today!

Yes a few of our single lightbox displays can adjust in height from 8ft to a shorter 6.5ft option. Separate graphics have to be purchased to accommodate the size desired. These modular pieces can then be combined to create larger more detailed structures.

After use, store your graphics by folding them in a neat manner in a bag that can hold them. If you ever get your graphics dirty, you can use a non-abrasive damp cloth to spot clean any areas as needed. However, if the mess is too much for hand cleaning, you can always put your graphics in the washing machine on the gentle cycle with cold water only. We recommend allowing the graphics to air dry after washing them. With the dye sublimated graphics, your SEG is going to last you many trade shows to come!

The benefits to using modular lightbox displays are the freedom of changing your booths design at will. You can have several different looks in just minutes.

With this newly designed SEG, the graphics are simple to install, using no professional installation. Start by pressing the corners of your graphics silicone beads into the tube frame channeling. We recommended starting by the corners so that when the last edge is installed It will have a seamless appearance.

The difference in the two LED displays we offer is very simple. It all lies in the light mechanisms. The modular displays have built in LED light right in the frame. Our regular backlit displays have a frame and LED curtain that is installed as well.

SEG’s first appeared for trade shows in Europe in 2008, and ever since then they have become a key preference for prospective companies that always have the best booths. This is all from its contemporary modern look, and simple installation. Compared to other forms of booth displays, the SEG allows for a versatile change of graphics for any event and occasion at a low price.

Retractable banners, also called roll up or pull up banner stands, have a spring roller mechanism that retracts the banner into the base of the stand when it's not in use, to protect the printed banner. These are the most popular type of banner stands for trade shows and events indoor, as they are the easiest to set up and take down.

Warning: The base of a retractable banner stand is spring-loaded with high tension, please do use the “key” to hold the banner into place. Attempting to open by yourself without experience could cause damages to the banner stand and possibly injury.

• Step 1. Pull the banner all the way up until the end of the thread lead.
• Step 2. Insert the security key into the hole on the side to hold the banner securely in the place.
• Step 3. Carefully remove the old banner, clear all the tapes and glues, open the top clap, set aside the top clap for the new banner.
• Step 4: Use double-sided tape to secure the new banner onto the banner lead first, then use clear tape to wrap around the edges.
• Step 5. Inset the top part of the new banner into the top clap bar, press firmly
• Step 6. Remove the security key and retract the new banner into the base.

To fly with a retractable banner, you will need to buy a hard banner stand carrying case and choose a retractable banner no wider than 36 inches.

No, these pull-up banners are designed to be used indoors only. They are not heavy enough to stay in one place if blown by the wind, and the base and retractable mechanism inside can be damaged or ruined if any water gets inside.

No, the tension fabric stand frames are built to an exact size to ensure the graphic fits snug and displays wrinkle free graphics.

The terms 'retractable banners' and 'pop up banners' are generally used interchangeably. But 'pop up displays ' are a totally different large format displays used strictly indoors.

Modular is a term used to describe the construction of an object using smaller interchangeable parts. Modular Alpine Trade Show Displays can be configured in a variety of ways. Smaller pieces make up larger frames that can be constructed to a customer's liking.

For a smart, versatile and sophisticated off-the-shelf exhibit with a custom appearance, check out our modular displays. The wide ranging line of modular exhibits use standardized aluminum or steel components as building blocks, and can often be reconfigured to fit multiple size spaces, or customized for any need.

Yes! On average, Fabric Banner Stands are more durable than retractable banner stands.

Inside the aluminum supporting pole is a bungee cord to help guide the pole set up and to keep the pole parts together so you won't ever lose half of your pole.

With this newly designed SEG, the graphics are simple to install, using no professional installation. Start by pressing the corners of your graphics silicone beads into the frames channeling. We recommended starting by the corners so that when the last edge is installed It will have a seamless appearance.

Depends on the model of your retractable banners. Height adjustable retractables like Flex Retractable Banner Stands come with telescopic poles that can be height adjustable, just turn and lock.

SEG’s first appeared for trade shows in Europe in 2008, and ever since then they have become a key preference for prospective companies that always have the best booths. This is all from its contemporary modern look, and simple installation. Compared to other forms of booth displays, the SEG allows for a versatile change of graphics for any event and occasion at a low price.

Currently we do not have Table top Retractable Banners in stock.But we do offer flexible changeable series, which is height adjustable 33.5 x 94. It can be displayed on a tabletop.

The process we use to create the graphics is called dye sublimated printing which fuses your designs ink onto the fabric for a lasting product. It includes vaporizing the ink so that they will saturate the material on an accurate scale. This is what gives all of our products a vibrant high resolution look and finish.

You need to carefully and slowly pull up your banner out of the stand and put it back into the stand, pay attention to keep the graphic centered or your banner might go in the stand crooked, causing damage to the edges of your graphic permanently.

TSEG’s can be used for a variety of applications including purposes for trade shows, retail stores, museums, restaurants, churches, universities, airports and other venues.

The process we use to create the graphics is called dye sublimated printing which fuses your designs ink onto the fabric for a lasting product. It includes vaporizing the ink so that it will saturate the material on an accurate scale. This is what gives all of our products a vibrant high-resolution look and finish.

Fabric Banner Stands can be used for a variety of applications including purposes for trade shows, retail stores, museums, restaurants, churches, universities, airports and other venues.

We offer several different sizes and styles of Banner Stands. For example, our tension fabric banner stands prices would begin at $179 for a 24in x 90in Economy Retractable Fabric Banner Stands, up to $329 for the 60in x 90in model. We also offer Retractable, Pop Up as well as Outdoor Banner Stands. Pricing information for these products can be found on their respective product pages.

Yes, we have two models of pull up banners with double-sided capabilities. Our Standard, and Interchangeable Flex retractables are available in double-sided, or with two graphics that can be displays simultaneously.